Here's a short video showing how to make controller Channel map files using VCDS. We sometimes ask for these to help you if you need technical support
Video Transcript WEBVTT
Hello, this is Derek from ilexa, and this is a quick guide to making a controller channel map in VCDS.
First choose Applications and then Controller Channel Map.
Type the controller address. In this case I'm going to do 03 for ABS.
Tick measuring values and adaptations.
Leave the output as pre-label file and click Go.
VCDS will now work its way through all the available measuring block channels.
There are a lot of channels and not all of them will be available on any particular controller.
So, you will see many boxes where it says error that the group is not available. Just ignore that and allow VCDS to work its way through the groups.
When it finishes the measuring blocks, it'll move onto adaptations.
And again, you'll see many channels not available and you'll also see some channels that say security access required.
VCDS will scan each data block and record the values found and save them
to log files stored in the logs folder (C:\Ross-Tech\VCDS\Logs). The files will be named with the
address then part number, then PLA, PLB or CSV
When VCDS is finished, the screen will go back and you can close VCDS